The Raptor engine’s role in racing dates back to before the Briggs & Stratton Racing division began in 1991. The workhorse of our racing line for almost 20 years, this engine line CEASED production in 1999 due to impending E.P.A. regulations. We ask that you contact your source of supply about parts availability as many parts have been discontinued.
Features
-
Racing connecting rod with integral oil dipper and larger radius I-beam.
-
Soild fuel tank bracket and improved tank to bracket connection.
-
Oil impregnated bronze exhaust valve guide for long competition life.
-
Revamped carburetor machining for uniform high- flow.
-
Redesigned head gasket for torque retention and heat transfer.
-
Longer high-strength head bolts for better control of head torque.
-
Silicon-beaded crankcase cover gasket for oil control and torque retention.
-
Upper retainer controls valve for spring control.
-
"As Cast" block, head and crankcase cover reduces combustion deposit and debris collection on internal parts.
| General Specifications |
|---|
| Model | 133230 |
|---|
| Type | 8124-01 |
|---|
| Displacement | 206 |
|---|
| Bore | 2.5615/2.5625 |
|---|
| Stroke | 2.438 |
|---|
| Compression Ratio | 6.5 to 1 |
|---|
| Factory Timing | 22 degrees BTDC |
|---|
Technical / Torque Specifications
| Description | Wrench / socket size | Torque |
| Magneto Armature | #10-24 X .875 | 30 lb-in. (3 Nm) |
| Back Plate (to cylinder) | | 100 lb-in. (11 Nm) |
| Blower Housing | 1/4 -20 X .625 | 80 lb-in. (9 Nm) |
| Breather Screw | #10-24 X .594 | 30 lb-in. (3 Nm) |
| Carburetor (to manifold) | | 65 lb-in. (7 Nm) |
| Connecting Rod | | 100 lb-in. (11 Nm) |
| Clutch Mount Screw | #8-32 X .410 | 30 lb-in. (3 Nm) |
| Cylinder Head | | 140 lb-in. (16 Nm) |
| Cylinder Shield | #8-32 X .410 | 30 lb-in. (3 Nm) |
| Exhaust Manifold | | 140 lb-in. (16 Nm) |
| Fan Retainer | | 140 lb-in. (16 Nm) |
| Fuel Tank | 1/4 -20 X .625 | 80 lb-in. (9 Nm) |
| Flywheel Guard | #8-32 X .410 | 30 lb-in. (3 Nm) |
| Flywheel Nut | | 60 lb-ft. |
| Cylinder Head Bolts | 5/16-18 X 2.46 | 140 lb-in. (16 Nm) |
| Intake Air Horn | | 45 lb-in. (5 Nm) |
| Intake Manifold (to cylinder head) | | 80 lb-in. (9 Nm) |
| Oil Drain Plug (internal) | 3/8" Square Drive | 125 lb-in. (14 Nm) |
| Rewind Guard | 5/16-18 X 1.125 | 30 lb-in. (3 Nm) |
| Spark Plug 5/8" Deep | | 180 lb-in. (20 Nm) |
| Stop Switch Bracket | #8-18 | 24 lb-in. (3 Nm) |
| Stop Wire | #10-32 | 30 lb-in. (3 Nm) |
| Crankcase Cover/Sump | 1/4-20 X 1.25 | 120 lb-in. (14 Nm) |